S 560 PRO

Super-automatic heavy duty truck tyre changer 14" - 46"/58"(1)

Super-automatic heavy duty truck tyre changer 14" - 46"/58". For truck, bus and agriculture tyres, professional truck tyre service and high volume shops. Suitable for both tube and tubeless tyres.

Super-automatic heavy duty truck tyre changer 14" - 46"/58". For truck, bus and agriculture tyres, professional truck tyre service and high volume shops. Suitable for both tube and tubeless tyres.

Functions
  • Hydraulic movement of clamping chuck holding arm (up-down);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm automatic tilting and travelling on carriage;
  • Simultaneous movement of operating arm travelling, tilting and tool rotation (by same control button);
  • Double tool (disk + finger) automatic rotation;
  • Wheel clamping by fully hydraulic operated jaws;
  • Operating arm and clamping chuck arm facing each other;
  • All motions controlled by console and pedal box;
  • Emergency safety button on control console, for stopping all functions;
  • Suitable for control console installation on pivoting arm (optional);
  • Rim center hole clamping range ø 80 - 1200 mm;
  • Clamping chuck minimum height from ground 315 mm (center);
  • Suitable for remote control installation (optional)
(1) For the rims from 47" to 58" it is necessary to use the optional set of 4 jaw extensions for clamping wheels from 47" to 58".
Rim clamping range without extensions 14" - 46"
Rim clamping range with extensions (optional) 14" - 58"
Max. tyre diameter 2400 mm (94,5")
Max. tyre width 1300 mm (51")
Power supply 3ph 230/400V 50Hz
Other voltages and frequencies available upon request
Rim center hole minimum clamping diameter 80 mm
Other voltages and frequencies available upon request
Hydraulic pump motor power 4,5 kW
Gearbox motor power Hydraulic
Operating pressure 130 bar (1885 psi)
Bead breaker force 36000 N
Net weight 1055 kg
Max. tyre assembly weight 1800 kg
Chuck rotation speed 1.5,2,3 ... 9 rpm
Max overall dimensions 2470÷2950x2140÷2350x970÷1900 mm
Optional Accessories
Roller tool for mounting / demounting tubeless truck tyres
Kit of spacers for the clamping jaws, for locking wheels with various thickness of flanging.
Set of 2 G-clamps for tyres with retaining ring. To hold rim and bead retaining ring during bead breaking operation.
Bead clamp with extra slide, for skidder tyre applications.
Clamp for alu-rims.
G-Clamp with wider bead-press angle, for agriculture tyres.
Kit of 4 clamp extensions for clamping range from 47" to 56".
Tubeless roller adaptor
S 560
S 560
S 558
S 558

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information