S 554T

Truck tyre changer 14"-26", suitable for Tubeless Tyres Only

Tyre changer for truck and bus fleets, suitable for tubeless tyres only with 14" - 26" rim (max. wheel diameter 1200 mm./47"; max. wheel width 780 mm./30").

Approved by
Main Features
Truck (TC)

Truck
Suitable for truck wheels

14\

14"-26"
Allows to operate with tyre assemblies from 14" to 26".

QC (TC)

Quick Clamping
Rim clamping is performed by faceplate, cone and a quick ring nut (removes the restraint of the clamping range, normally found on conventional clamping chuck tyre changers).

JOYSTICK

Joystick
Allows to move the tool with maximum simplicity and accuracy.

RBB (TC)

Roller Bead Breaking
Bead breaking by disks, without contact with the rim, works with tyre assembly in horizontal position

Tyre changer for truck and bus fleets, suitable for tubeless tyres only with 14" - 26" rim (max. wheel diameter 1200 mm./47"; max. wheel width 780 mm./30"). Equipped with manual wheel clamping system by faceplate, cones and ring nut, and with bead pressing roller for mounting/removing tubeless tyres.
Functions
  • Hydraulic movement of clamping chuck holding arm (up-down);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm manual tilting;
  • Wheel clamping by face plate, cones and ring nut;
  • Operating arm and clamping chuck arm facing each other;
  • All motions controlled by joysticks;
  • Safety switches and electric circuit breakers for both pump motor and chuck motor;
  • Suitable for installation of additional extra arm + roller, for faster bead breaking, mounting and demounting operation (optional)
Rim clamping range 14" - 26"
Max. tyre diameter 1200 mm (47")
Max. tyre width 780 mm (30")
Bead breaker force 18300 N
Operating pressure 130 bar (1885 psi)
Power supply 400V / 230V - 3ph
Other voltages and frequencies available upon request
Hydraulic pump motor power 0,75 kW (3 ph)
Clamping chuck motor power 1,1 kW (3 ph)
Net weight 380 kg
Max. tyre assembly weight 1500 kg
Max overall dimensions 1330÷1570x1500x1160 mm
Standard Accessories
Standard accessories
Optional Accessories
Roller tool for mounting / demounting tubeless truck tyres
Additional tool-holder, including tubeless roller
Double mounting / demounting tool with bead levers.
Clamp for alu-rims.
Bead clamp with extra slide, for skidder tyre applications.
G-Clamp with wider bead-press angle, for agriculture tyres.
S 554
S 554

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information